HONEST have clear focus to produce best quality textile machineries and satisfy the requirements as per customer demand.
Our aim is to give maintenance free, user friendly with consistent quality of parts with interchangeable to our products, and increase our sales.
We will do continual improvement in our products, process , delivery & services through customer / user's feedback.
We believe in team spirit , team work and maintain high standard of work environment.
|Technical Specification Semi Automactic Loom
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITH OUT PRIOR INTIMATION.
||Semi Automatic Loom
(760mm), 45" (1145mm), 52" (1320mm)
(1420mm), 60" (1525mm), 64"
(1730mm) 72" (1830mm), 78” (1981mm)
|Drop - Box
2x1, 2x2, 4x1, 4x4
Tongue Less Type
27 x 37(mm), 394 x 29 x 39(mm), 394 x
31 x 41(mm)
Request (WT) With Tongue Type 406 x 35 x 45)
Reed, Loose Read on Request.
& Cone Pulley Type or Positive Shedding
Dobby or Jacquard can be mounted.
140 RPM (Depending on Yarn, Reed Space etc.)
Fork System. For Pick by Pick Loom Centre Fork System.
Positive Regulated Let off Mechanism
with Separate Frame or Attached Frame.
|Take - Up
or 7 Wheel Pickle's Take Up Mechanism.
mechanism of loom is so designed to achieve maximum efficiency by smooth and
economical transmission and production by high speed running.The
loom is individually driven by one electric motor 0.5HP to 1.0 HP 930 RPM by
2 V belts. The loom is capable of running at 110 - 140 RPM depending on reed
space and fabric quality. Heavy Brake System provided to avoid weaving
centre picking is adopted for smooth and uniform action for high speed
operation. Large cams give very smooth picking and ensure longer life for the
shuttles, pickers and picking sticks.
Double Roller Ball Bearing :
with ball bearing can also be provided at Emery Roll, Rocking Shaft, Crank Shaft,
Bottom Shaft and Driving Pulley if so desire.
VTM: This model is most versatile
and widely used for a variety of application, in all over the country. The
same machine is being used for, weaving Saris, Dress material. Suiting -
Shirting and industrial fabrics. It can weave up to 250 Gms / sq. meter.
VTM - PBT:
This is upgraded version of
the above model. Here the crank and the bottom shafts are made heavier to
suit to the requirements of control panel which will give frequent jerks, due
to instant stops, and also to meet the requirements of 1200 hooks jacquards.
VTM - PBT (HBB):
Here, the features of above
models are equipped with ball Bearings at rocking shaft and emery roll.
VTM - PBT (FBB):
In this model, the main
features VTM - PBT models are supported by providing ball bearings at crank
shaft – bottom shaft, rocking shafts, emery roll. This helps in getting higher
loom-RPM. There by increased productivity, better fabric weaving, low power
consumption and it can weave higher denier and higher picks also.
Heavy Reed Pick:
You can weave heavy reed pick
on this machines as compared to other Indian machines.
It is observed that due to low
maintenance, the down time have been minimised. These have also proved
economical and have very good result into higher output.
You can increase the RPM of
the loom which can give higher output.
Low Power Consumption:
Having used ball bearings, the
movement of parts have become easy and hence, the power consumption has
reduced. One person can handle 4 to 6 machines depending on preparatory yarn
qualities and weaver; this has resulted in good amount of saving in recurring
There has been lot of
reduction in breakages of spares.
The Pickle’s indirect and intermittent (7wheel motion) take up
system is adopted in loom. The change gear is such that each tooth
corresponds to one pick.The breast roller, guide roller and press roller are of steel
pipes. Emery roll and cloth roll are made of steel pipe. Cloth roll can be
replaced without stopping the loom. The five wheel attachment gives the cloth
proper tension and the time even when the cloth is unrolled.
The letting of system is of frame type which maintains uniformity
of warp tension and constant speed by super sensitive and accurate tension
control.It is positive type with automatic feeler link mechanism with
self lubricating bushes in the tension lever brackets. Guide roller and tension roller are made of plated steel pipes.
Unrolling head wheel is provided at both front and rear side of the loom. The
warp tension for different weights of fabrics can be made by adjusting the
position of guide roller without changing weight on the levers. The large
package operation is Practicable on the let-off system with the threaded beam and
flanges up to 20”dia.
An improved fast reed system of beating is employed in this model
for stable flight of shuttle and correct beating of weft. Steel slay is
supplied for longer life and for weaving heavy quality of fabrics.
Shedding in is adopted with double treadle bowls with tappet to
achieve ideal shedding. The loom can weave plain fabric with tappet motion.
It can also accommodate dobby up to 24 or 40 for jacks or 400, 600, 800, 900,
1200 hooks jacquards can be used.